Skip to main content

Provisioning a line to a Yealink Base Station

S
Written by Support
Updated over 2 weeks ago

Scope:

This document will show you how to provision a line to a Yealink Base Station.

Requirements:

  • Office Manager access to the PBX Portal

  • Mac Address and model of the Yealink Base Station

Accessing the web GUI of the base

  1. Enter the IP address in a web browser.

  2. Enter the login information. ( If you do not know contact your vendor for more information.)

Provisioning the line to the Yealink Base Station

If the Yealink Base Station is already on Yealink Redirection and Provisioning Server.

  1. Add the phone to the user that is going to be using a handset. ( Set the Model of the phone to of the base or handset model and enter the mac address of the base.)
    ​

  2. Login into the web GUI of the base.
    ​

  3. Click on the Settings tab.
    ​

  4. At the left menu click on Upgrade.

  5. Click Reboot.

  6. Once the base comes back up the first line should be registered. (Note: This is only for the first extension. If you are adding other lines then you will want to go to the Auto Provision tab and click on "Auto Provision now".)

If the Yealink Base Station is not on Yealink Redirection and Provisioning Server. Follow this document to get the first line registered and then If you are adding other lines then you will want to go to the Auto Provision tab and click on "Auto Provision now"

Did this answer your question?