Skip to main content

Register a Yealink handset to a Base Station

S
Written by Support
Updated over 3 months ago

Scope:

This document will show you how to register a Yealink handset to a Base Station.

Requirements:

  • The IP address of the Yealink Base

Accessing the web GUI of the base

  1. Enter the IP address in a web browser.

  2. Enter the login information. ( If you do not know contact your vendor for more information.)


Registering the handset to Yealink Base.

  1. Access your device’s web interface.

  2. Navigate to “Status → Handset&VoIP” and click “Start Registration”.

  3. On the handset click the “OK” button.

  4. Navigate to “Settings” → “Registration” → “Replace Base”. Select the Base you want to register and press “OK”.

  5. A serial number will appear under “Subscribe Base”. Press “OK” and then “Enter PIN” (by default 0000).

  6. Click “Done” to successfully subscribe the handset.

  7. Once the registration is complete, the device will be visible on your device’s web interface in the “Registered Handsets” section.

  8. Repeat the above steps for each handset/sip account to be registered on the base.

Did this answer your question?