Skip to main content

Yealink: Screen Capture and Access

S
Written by Support
Updated over 11 months ago

Scope:

The following steps will allow you to view the screen remotely for any Yealink phone

Requirements:

This requires firmware v73 or higher

Original instructions can be found here

Configure Phone for Remote Access Via Web GUI (option 1)

  1. Log into web GUI of phone at https://<ipaddress>

  2. Enter your credentials. Default is admin/admin. After provisioning these will be changed. Contact your service provider for credentials if needed

  3. Click on Features

  4. Click on Remote Control

  5. In the field Action URI Allow IP List enter any

  6. Click Confirm

Configure Phone for Remote Access Via Overrides (option 2)

  1. Add the following override to your Advanced page in Manager Portal or NDP

    • features.action_uri_limit_ip="any"

Accessing Phone Screen

  1. From any web browser navigate to https://<ipofphone>/screencapture

  2. You will be prompted for a user name and password. These are the same as the web GUI credentials. Contact your service provider if you do have them

  3. The screen will refresh with the same image that is present on the phone's screen

Did this answer your question?